OEM Solutions › eMMC › Industrial

Industrial Temperature

Industrial eMMC 5.1

Built for factory, outdoor and harsh environments, -40°C to 85°C.

Request a sample or quote View part numbers

Other temperature grades

Automotive eMMC-40°C to 105°C
→
Standard eMMC-25°C to 85°C
→
All gradesAll eMMC
→

Industrial

-40°C to 85°C

  • 4GB to 256GB
  • 100 & 153-ball BGA
  • pSLC, MLC, 3D TLC

Find your part

Filter by package, capacity and NAND type.

Item No. Interface Form Factor Operating Temp Capacity NAND Type Seq. Read (MB/s) Seq. Write (MB/s) Info
E5-100IM-16G eMMC 5.1 HS400 100-ball BGA Industrial -40°C to 85°C
  • 16GB
 MLC 320 125
E5-100IM-8G eMMC 5.1 HS400 100-ball BGA Industrial -40°C to 85°C
  • 8GB
 MLC 260 100
E5-100IP-4G eMMC 5.1 HS400 100-ball BGA Industrial -40°C to 85°C
  • 4GB
 pSLC 260 100
E5-153IT1-128G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 128GB
 3D TLC 320 245
E5-153IT2-128G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 128GB
 3D TLC 310 130
E5-153IM-16G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 16GB
 3D TLC 100 115
E5-153IT2-256G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 256GB
 3D TLC 310 130
E5-153IT1-32G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 32GB
 3D TLC 100 115
E5-153IT1-64G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 64GB
 3D TLC 320 245
E5-153IT2-64G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 64GB
 3D TLC 310 130
E5-153IM-8G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 8GB
 MLC 260 105
E5-153IP-4G eMMC 5.1 HS400 153-ball BGA Industrial -40°C to 85°C
  • 4GB
 pSLC 260 100
Media image 1

About the Technology

About this grade
Centon industrial eMMC 5.1 runs from -40°C to 85°C for factory, outdoor and harsh-environment designs. NAND flash and controller share one soldered BGA package that handles ECC, wear leveling and bad-block management, so your design boots and runs from a single chip. Choose 100 or 153-ball BGA from 4GB to 256GB, in pSLC, MLC or 3D TLC, with long-lifecycle supply for products that stay in production for years.
What makes eMMC industrial grade?
It is rated to run from -40°C to 85°C, against roughly 0°C to 70°C for consumer parts, so it keeps working in unheated enclosures, outdoors and on the factory floor.
Which NAND should I choose for an industrial design?
pSLC for write-intensive data logging and the longest service life, MLC for balanced boot and application storage, 3D TLC for the most capacity at the lowest cost per gigabyte.
Do you offer long-term supply?
Yes. Centon eMMC is backed by long-lifecycle supply and engineer-to-engineer support for OEM programs. Contact us for samples and qualification.

How to select the right NAND solution?

Capacity

How much data do you need to store? Bits per cell determines density per chip. Higher density NAND fits more storage in the same package, which matters in space constrained BGA designs. pSLC sacrifices half its physical capacity to gain endurance.

Endurance

How many write cycles the flash can absorb before wearing out. Driven by your workload's write intensity, a device that logs sensor data every second has a fundamentally different endurance requirement than one that boots, runs, and is rarely written to.

Cost

Cost per gigabyte tracks closely with density. 3D TLC is the lowest-cost option per gigabyte; pSLC is the highest. The right answer is rarely "the cheapest" or "the most durable"; it's the one that meets your endurance target without overspending on margin you won't use.

Service-backed

More than parts

Our services →
  • Inventory managementStock held for your program.
  • CustomizationLabels, firmware and packaging.
  • Long-lifecycle supplyBuilt as long as parts are available.
  • Engineer supportDirect help from our engineers.